PowerBox iGyro SRS 3500 W/O GPS W/O USB Interface

Stock Status: Sold Out
PowerBox iGyro SRS 3500
Facebook
Twitter
Information
The PowerBox iGyro SRS is a completely new type of gyro system intended for fixed-wing model aircraft. At the development stage our constant aim was to com-bine maximum versatility with simplicity of operation. The system incorporates a regulatory algorithm specifically developed for fixed-wing models, which causes hardly any alteration in the model’s familiar flying characteristics; at the same time the aeroplane flies much more smoothly and accurately, and is less sensitive to unwanted weather-induced or aerodynamic influences. The need for mixers, such as elevator to rudder or flaps, is eliminated entirely. The iGyro™ exploits the latest servo bus technology to minimise the extremely complex wiring arrangements necessitated by previous gyro systems. 

The ability to assign any channel to the gain adjusters makes it possible to set up the desired gyro effect accurately in just one short flight. Independent adjustment of each of the five outputs is possible, enabling the modeller to set up gyro gain and direction of effect precisely. The separate GPS sensor provides a means of obtaining a constant gyro effect over the model’s full speed range, effectively eliminating the problem of  over-compensation leading to oscillation in high-speed flight. In version 16 and later the software include a menu-based setup assistant which makes it possible to complete all the settings in just a few minutes.

Features

Extremely accurate triple-axis MEMS sensor

Special regulatory algorithm designed for fixed-wing model aircraft

Menu-based setup assistant

Three-stage flight phase switching

Three axes distributed to five servos, each adjustable independently

GPS-regulated gyro gain

Integral delta mixer

Can be installed in any attitude

Graphic OLED screen with 128 x 64 pixels

Ultra-simple menu-controlled programming method using the SensorSwitch

SRS technology for use with various bus systems:

Futaba S-Bus, Spektrum SRXL, DSM2/DSMX, JR DMSS, HoTT, M-Link and Jeti

Unrestricted channel assignment (channel mapping)

Digital output can be passed on to an SRS PowerBox system

16-bit processor for fast, high-resolution signal processing

Settings can be stored on a PC and reloaded at any time

Updateable with PowerBox Systems USB Interface connectors

Robust aluminium case

Technical Data

Operating voltage 4.0V - 9.0V

Current drain Power-on state 51mA

Current drain, GPS 60mA

Maximum load current 10A

Signal input serial

Supported RC systems Futaba, Spektrum, JR, Jeti, Graupner, Multiplex

Receiver redundancy SRS

Servo sockets 5

Servo signal resolution 0,5µs

Gyro regulation Heading- and Normalmode

Gyro sensor type MEMS

Number of sensor axes 3

Screen OLED 128 x 64 pixels, graphic

Dimensions 52 x 35 x 14 mm

Weight 50g, incl. GPS Sensor

Temperature range -30°C to +75°C

Specifications
  • MPN:
    PowerBox iGyro SRS 3-Axis Gyro 3500
  • EAN:
    3500
  • Brand:
    PowerBox Systems
  • Product Code:
    PowerBox iGyro SRS 3-Axis Gyro 3500
  • Weight:
    0.101kg
Reviews
product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review