KUZA 7075 T6 Heavy Duty
Dual Alloy Servo Arm V2
For Futaba 25T servo
 

When you've purchased one of the best aircraft currently available,
why equip it with anything less than the best components?
Choose the new Goldwing heavy duty 7075 T6 Aluminum servo
arms for control surface actuation. Available in 1.5", 2" single arms
and 4" and 5" dual arms for pull-pull systems.
These arms are available for 23 spline (JR),
24 spline (most Hitec servos) and
25 spline (Futaba, MKS, Savox, some Hitec brushless servos)
with your choice of 2.5mm or 3mm tapped holes.


SPEC

KUZA 7075
Heavy Duty
Dual arm 
Made of T6 Alloy
Servo Arm is V2
Part Number KAGOD75F V2
For 25 teeth servos / Futaba 
Size = 3.25 " / 82mm 
The threaded holes / bolt holes are 3.0mm
for the 35cc models and above
that accept the 3.0mm ball joints