The MULTIGyro G3 has been developed specifically for R/C fixed-wing model aircraft and automatically stabilises the model. You instantly fly more accurately and safely! The model's familiar flying characteristics are virtually unchanged, but it flies much more smoothly, more precisely, and is less susceptible to weather-induced and aerodynamic influences. The triple-axis stabilisation system is suitable for all current types of fixed-wing aircraft, including: Normal aircraft, V-tail and delta/flying wings. A special feature of the MULTIGyro G3 is its three modes of operation. The gyro can be switched between OFF, Normal (damping) and Heading-Hold (stabilisation) from the transmitter using a free channel. Normal mode virtually eradicates the effect of wind and turbulence on the model (wind eliminator), whereas Heading-Hold mode enables the model to maintain the last commanded flight attitude until the pilot gives a further control command. Torque-rolls and hovering become child's play. Gyro gain can be adjusted separately for each primary axis (elevator, rudder and aileron) on the device itself. In this way the model can be set up accurately to suit your preference. Installing the MULTIGyro G3 could hardly be simpler, and only takes a few minutes.

Key Features

Triple-axis gyro system - specifically for R/C fixed-wing model aircraft

Suitable for all current R/C systems

Selectable model type: standard fixed-wing, delta or flying wing, V-tail

Modes switchable at the transmitter (Off, Normal, Heading-Hold)

Variable gyro gain, individual and without PC

Small and light (47 x 33 x 14mm, 11g)

What's in the Box

1x MULTIGyro G3 Gyro

4x Connecting Leads

2x Self-Adhesive Mounting Pads

Gyro Technical Specifications

Weights & Dimensions

Weight 11g 0.39oz

Shipping Weight 0.05kg 0.11lbs

Product Width 33mm 1.30in

Product Length 47mm 1.85i