PowerBox Mercury SRS, incl. OLED-Display and GPS 4110

£454.99
RRP: £509.99
Stock Status: In Stock
PowerBox Mercury SRS, incl. OLED-Display and GPS 4110
Facebook
Twitter
PayPal Checkout
Information

The PowerBox Mercury SRS is a new power management system which combines all the experience and findings we have gained over the last few years, together with customer requests, in a single compact unit. Never before has so much functionality been crammed into such a small space! The Mercury SRS is ideal for any application requiring an airborne system which provides an uncompromising level of high performance. Integral iGyro, dual receiving system, telemetry, door sequencer and servo matching are just a few of the highlights which this small, lightweight device provides.

In its development we paid particular attention to simplicity of operation. For example, the integral Assistant guides you through the entire basic setup procedure. Channel assignments and gyro settings are entered in just a few minutes with the help of the external OLED screen. Thanks to the new six-axis sensor, the unit learns its installed orientation when the owner simply raises or lowers the model's tail. The user enters the model type and desired method of working for the iGyro: for example, it is possible to select automatic torque roll, thrust vector control or various settings with and without attitude assist function.

One highlight is the iGyro's new Test-fly Assistant: a combination of the iGyro 3e and the iGyro SRS reduces the in-flight setup procedure to a single rotary knob. Two or three passes suffice to complete the gyro adjustments, and the various flight phases can be called up by a switch, as previously defined using the Setup Assistant.

As with the Royal SRS, an optional addition is the proven GPS, which provides automatic gyro gain adjustment according to the model's airspeed.

To ensure maximum security, two receivers (four satellites with Spektrum systems) can be connected to the installed SRS. Battery, receiver and GPS data are available for telemetry with virtually all radio control systems.

An integral Assistant is also available for setting up the door sequencer. Any modeller who knows how tiresome the adjustment procedure can be with conventional door sequencers will be surprised how quick it can be to set up a retract system including four wheel doors; it takes just a few minutes.

The servo match function is available for all outputs. This facility enables various functions - such as the left and right landing flaps - to be controlled using just one channel. It is also used to synchronise multiple servos operating on a single control surface. Incidentally, the servo output assignment is also pre-defined using the Setup Assistant. The assignment varies according to the model type you select; multiple outputs can be assigned per channel, and the system 'learns' the landing flap and throttle channels. The powerful 16-bit processor and the system's update facility guarantee a future-proof device; updates with new functions can be installed at any time using PowerBox Terminal or our BlueCom adapter. PowerBox pilots know: their systems always reflect the latest state of technology!

Features

Integral iGyro: Triple-axis gyro system with attitude assist function

Expanded setup assistant for ultra-simple operation

Special regulatory algorithm for fixed-wing model aircraft

Six independent gyro outputs for: 2x ailerons, 2x elevators, 2x rudders

Special thrust vector support

GPS-regulated gyro gain

Extremely accurate six-axis MEMS sensor

Integral Delta and V-tail mixer

Door sequencer: freely programmable outputs with set-up assistant

Servo-Match function: servo centre, end-points and reverse for all 15 servo outputs

SRS: Serial Receiver System provides the facility to use receivers with serial interface: P²BUS, S-Bus, M-Link, EX-Tele, DSM2/DSMX, X-BUS and HoTT

Unrestricted channel assignment for all 15 PowerBox outputs

Graphic OLED screen with 128x64 pixels

Extremely user-friendly menu-based programming using the SensorSwitch

15 channels

Signal amplification and interference suppression for all 15 outputs

Flight recorder, recording of lost frames and fail-safe events

Variable frame rate, range 12ms - 21ms

16-bit processors for fast, high-resolution signal processing

Double-regulated output voltages for receivers and servos

regulated output voltage 5.9V or 7.4V

Connection facilities for P²BUS, S-Bus, M-Link, EX-Tele, DSM2/DSMX, X-BUS und HoTT downlink bus systems

Direct transmission of the battery informations, receiver data and GPS data to the transmitter

Separate voltage display for each battery

Minimum value memory alerts the user to voltage collapses

Large-area heat-sinks for high regulator performance

Regulator monitoring, regulator error indicator

Support for four battery types: LiPo/LiIon, NiMh/NiCd, LiFePo

Suppression of any servo feedback currents which may occur

Updateable with PowerBox Systems USB Interface or BlueCom adapter

Technical Data

Operating voltage 4.0V - 9.0V

Power supply 2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH

Current drain Power-on state 99mA (with OLED)

Current drain Standby 3µA

Maximum load current Peak 2x20A

Drop-out voltage 0.3V

Output voltage 5.9V or 7.4V regulated

Signal input serial

Supported RC systems PowerBox, Futaba, MPX, Jeti, Spektrum, JR, Graupne

Receiver redundancy SRS

Channels 15 (18)

Servo sockets 15

Programmable servo outputs 15

Servo signal resolution 0.5µs

Signal frame rate 12ms, 15ms, 18ms, 21ms

Integral gyro system iGyro

Gyro regulation Attitude assist and Normalmode

Gyro sensor type MEMS

Number of sensor axes 6

Screen OLED

Integral door sequencer yes

Supported telemetry systems P²BUS, S-Bus, M-Link, EX-Tele, DSMX, X-BUS, HoTT

Dimensions 93 x 67 x 19 mm

Weight 85g

Weight Sensor Switch 15g

Weight of LCD screen 15g

Temperature range -30°C bis +75°C

Set contents

PowerBox Mercury SRS

OLED-Display

SensorSwitch

3 Patchwires 3-pole, 200mm

8 mounting screws

Operating instructions

Optional: GPS Sensor (Order No.: 4110)

Specifications
  • MPN:
    PowerBox Mercury SRS, incl. OLED-Display and GPS 4110
  • EAN:
    4110
  • Brand:
    PowerBox Systems
  • Product Code:
    PowerBox Mercury SRS, incl. OLED-Display and GPS 4110
  • Weight:
    0.101kg
Reviews
product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review