ZAP Z-Poxy Finishing Resin 12oz PT40

Z-Poxy Finishing Resin is a premium lightweight two part epoxy laminating / finishing type resin. Use for glassing the center-section of a wing or the entire aeroplane. Great for sealing model boat hulls, inside and out. Use to seal all engine and fuel tank areas. Great for sheeting foam wing panels, too. It will bond to itself and does not get brittle with age. This long cure formula offers easy application, sands easily for a smooth finish and is compatible with many polyester resins.
Features
Odourless
Clear formula (cures light yellow)
Non brittle
Sands easily to a smooth finish
Laminates wood & foam
Great for applying glass cloth
Working time: 20 to 30 minutes
Full cure in 6 to 8 hours
Compatible with many polyester resins.
Easy sanding.
Great for glass cloth and skinning model aircraft glass cloth wings.Odourless,
equal mix, full cure in 6 to 8 hours.
Works best on: Glassfibre, cloth, pottery, metal, wood, glass, aluminium and ceramics.

Works best on:
Aluminium
Ceramic
Cloth
Glass
Most plastics
Pottery
Wood